14026
Bowmansville, NY
ECWA DIRECT

Is Bowmansville tap water safe to drink?

Some concern
Last tested: November 2025
Source: Official EPA UCMR5 federal monitoring data. Last tested November 2025.

The short answer for Bowmansville

Bowmansville tap water has 1 detected contaminant, currently below EPA limits (tested November 2025). 6:2 FTS measured closest to the threshold. See the full compound-by-compound report.

The health risk for Bowmansville

PFAS traces were detected in local water tests, though levels are currently below EPA limits. Since no amount of PFAS is considered completely safe by health researchers, a certified filter adds a meaningful layer of protection, especially for children.
  • PFAS or other chemicals detected; no confirmed exceedances in multiple samples.
6:2 FTS concentration (µg/L) November 2025
0 µg/L 0.005 µg/L 0.01 µg/L
0.005 µg/L
Detected
µg/L
0.005 µg/L
EPA limit
guideline
100% of limit
Comparison
vs. guideline
EPA limit: 0.005 µg/L | Your water: 0.005 µg/L
Add a Layer of Protection for Bowmansville Tap Water

6:2 FTS (a PFAS 'forever chemical') was detected below EPA limits. A certified filter can still add an extra layer of protection.

Water filter recommendation for Bowmansville tap water: Epic Pure XP Water Filter Pitcher
Pitcher filter
Epic Pure XP Water Filter Pitcher
NSF-certified dual-layer filtration reduces 70+ contaminants including PFAS, lead, chlorine, microplastics, and bacteria.
NSF/ANSI 42, 53, 401 & P473Removes 99.99% PFASMade in USABPA-free
Best for renters or quick setup. No installation needed.
Get the Epic Pure XP →
Most elevated compounds
Compound Measurement EPA Limit Comparison
6:2 FTS
Tested: November 2025 · Van de Water WTP		 0.005 µg/L 0.005 µg/L 100% of limit
View all tested compounds

Sturgeon Point WTP · Tested: November 2025

Compound Measurement EPA Limit Comparison
lithium <9.000 µg/L 10 µg/L Below limit
PFHxS <0.003 µg/L 0.004 µg/L Below limit
HFPO-DA <0.005 µg/L 0.01 µg/L Below limit
PFNA <0.004 µg/L 0.01 µg/L Below limit
PFHxA <0.003 µg/L 3 µg/L Below limit
PFBA <0.005 µg/L 6 µg/L Below limit
11Cl-PF3OUdS <0.005 µg/L 0.005 µg/L Below limit
4:2 FTS <0.003 µg/L 0.003 µg/L Below limit
6:2 FTS <0.005 µg/L 0.005 µg/L Below limit
8:2 FTS <0.005 µg/L 0.005 µg/L Below limit
9Cl-PF3ONS <0.002 µg/L 0.002 µg/L Below limit
ADONA <0.003 µg/L 0.003 µg/L Below limit
PFBS <0.003 µg/L 0.003 µg/L Below limit
PFDA <0.003 µg/L 0.003 µg/L Below limit
PFDoA <0.003 µg/L 0.003 µg/L Below limit
PFHpA <0.003 µg/L 0.003 µg/L Below limit
PFHpS <0.003 µg/L 0.003 µg/L Below limit
PFOA <0.004 µg/L 0.004 µg/L Below limit
PFOS <0.004 µg/L 0.004 µg/L Below limit
PFPeA <0.003 µg/L 0.003 µg/L Below limit
PFTrDA <0.007 µg/L 0.007 µg/L Below limit
PFUnA <0.002 µg/L 0.002 µg/L Below limit

Van de Water WTP · Tested: November 2025

Compound Measurement EPA Limit Comparison
6:2 FTS 0.005 µg/L 0.005 µg/L 100% of limit
lithium <9.000 µg/L 10 µg/L Below limit
PFHxS <0.003 µg/L 0.004 µg/L Below limit
HFPO-DA <0.005 µg/L 0.01 µg/L Below limit
PFNA <0.004 µg/L 0.01 µg/L Below limit
PFHxA <0.003 µg/L 3 µg/L Below limit
PFBA <0.005 µg/L 6 µg/L Below limit
11Cl-PF3OUdS <0.005 µg/L 0.005 µg/L Below limit
4:2 FTS <0.003 µg/L 0.003 µg/L Below limit
6:2 FTS <0.005 µg/L 0.005 µg/L Below limit
8:2 FTS <0.005 µg/L 0.005 µg/L Below limit
9Cl-PF3ONS <0.002 µg/L 0.002 µg/L Below limit
ADONA <0.003 µg/L 0.003 µg/L Below limit
PFBS <0.003 µg/L 0.003 µg/L Below limit
PFDA <0.003 µg/L 0.003 µg/L Below limit
PFDoA <0.003 µg/L 0.003 µg/L Below limit
PFHpA <0.003 µg/L 0.003 µg/L Below limit
PFHpS <0.003 µg/L 0.003 µg/L Below limit
PFOA <0.004 µg/L 0.004 µg/L Below limit
PFOS <0.004 µg/L 0.004 µg/L Below limit
PFPeA <0.003 µg/L 0.003 µg/L Below limit
PFTrDA <0.007 µg/L 0.007 µg/L Below limit
PFUnA <0.002 µg/L 0.002 µg/L Below limit

Water utilities serving ZIP 14026

Service area boundaries are approximate and based on state filings or modeled estimates. Contact your utility to confirm exact service at a specific address.

Modeled boundaries are shown with a dashed outline. Outlines appear when service-area boundary data is available for this ZIP.

Frequently Asked Questions about ZIP 14026 Tap Water

What's in ZIP 14026 tap water?

ZIP 14026 has 1 detected contaminant below EPA limits in this dataset. 6:2 FTS measured closest to its guideline.

Will boiling ZIP 14026 tap water remove 6:2 FTS?

Boiling tap water can kill many pathogens, but it does not remove most chemical contaminants tracked in EPA monitoring. Several dissolved contaminants can even concentrate as water evaporates. For the chemical contaminants reported in ZIP 14026, a certified filter is more reliable.

Do basic pitcher filters remove 6:2 FTS?

Basic pitcher filters are typically rated for chlorine, taste, and odor (NSF/ANSI 42), not for the broader list of contaminants tracked in EPA monitoring. Match the certification (NSF/ANSI 42, 53, 58, or P473) to the specific compounds listed in this report before assuming a filter helps.

Who provides tap water in ZIP 14026?

Public records identify ECWA DIRECT as a primary water system associated with ZIP 14026. Service boundaries can vary by address, so confirm exact service with the utility.

When was ZIP 14026 tap water last tested?

The most recent test date used in this report is November 2025. EnviroClarity last refreshed this page on 2026-05-05.

Where can I find the official water quality report for ZIP 14026?

Every U.S. public water system is required to publish an annual Consumer Confidence Report (CCR). Contact ECWA DIRECT or visit their website for the latest official report covering ZIP 14026. The EPA also maintains a national CCR locator.

Primary source EPA UCMR5 (2023-2025)
Guideline source EPA drinking water standard (6:2 FTS: 0,005 µg/L)
Last tested November 2025
Last page update 2026-05-05

Check another ZIP code

    Nearby ZIP reports

    Data reflects publicly reported utility records from EPA datasets and local utility disclosures. This information is educational and not medical advice.

    Filter Bowmansville tap water → see certified options