Is Milford tap water safe to drink?
- Milford
The short answer for Milford
Milford tap water has 4 contaminants above EPA guidelines, including PFOA at 1.8× the limit (tested February 2025). See the full compound-by-compound breakdown and filter recommendations.
The health risk for Milford
- PFBS, PFOA, PFOS, PFPeA above limit.
PFOA (a PFAS 'forever chemical') was detected above EPA limits. These filters are independently certified to reduce common drinking-water contaminants.
Here's what actually removes PFAS from your water
The right filter eliminates PFAS at the tap. But not all filters do - and the type you choose matters for your home.
Common pitchers like Brita do not remove PFAS. You need a filter independently certified to NSF P473 (for pitcher filters) or NSF/ANSI 58 (for reverse osmosis systems). All three options below carry the relevant certification.
| Compound | Measurement | EPA Limit | Comparison |
|---|---|---|---|
| PFOA Tested: February 2025 · Godfrey WTP |
0.007 µg/L | 0.004 µg/L | 78% above limit |
| PFOS Tested: February 2025 · Godfrey WTP |
0.007 µg/L | 0.004 µg/L | 65% above limit |
| PFBS Tested: February 2025 · Godfrey WTP |
0.004 µg/L | 0.003 µg/L | 20% above limit |
| PFPeA Tested: February 2025 · Godfrey WTP |
0.003 µg/L | 0.003 µg/L | 7% above limit |
View all tested compounds
Godfrey WTP · Tested: February 2025
| Compound | Measurement | EPA Limit | Comparison |
|---|---|---|---|
| PFOA | 0.007 µg/L | 0.004 µg/L | 78% above limit |
| PFOS | 0.007 µg/L | 0.004 µg/L | 65% above limit |
| PFBS | 0.004 µg/L | 0.003 µg/L | 20% above limit |
| PFPeA | 0.003 µg/L | 0.003 µg/L | 7% above limit |
| PFHxA | 0.003 µg/L | 3 µg/L | 0.1% of limit |
| lithium | <9.000 µg/L | 10 µg/L | Below limit |
| PFHxS | <0.003 µg/L | 0.004 µg/L | Below limit |
| HFPO-DA | <0.005 µg/L | 0.01 µg/L | Below limit |
| PFNA | <0.004 µg/L | 0.01 µg/L | Below limit |
| PFBA | <0.005 µg/L | 6 µg/L | Below limit |
| 11Cl-PF3OUdS | <0.005 µg/L | 0.005 µg/L | Below limit |
| 4:2 FTS | <0.003 µg/L | 0.003 µg/L | Below limit |
| 6:2 FTS | <0.005 µg/L | 0.005 µg/L | Below limit |
| 8:2 FTS | <0.005 µg/L | 0.005 µg/L | Below limit |
| 9Cl-PF3ONS | <0.002 µg/L | 0.002 µg/L | Below limit |
| ADONA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFDA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFDoA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFHpA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFHpS | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFTrDA | <0.007 µg/L | 0.007 µg/L | Below limit |
| PFUnA | <0.002 µg/L | 0.002 µg/L | Below limit |
Dilla WTP (blend) · Tested: Multiple dates
| Compound | Measurement | EPA Limit | Comparison |
|---|---|---|---|
| lithium | <9.000 µg/L | 10 µg/L | Below limit |
| PFHxS | <0.003 µg/L | 0.004 µg/L | Below limit |
| HFPO-DA | <0.005 µg/L | 0.01 µg/L | Below limit |
| PFNA | <0.004 µg/L | 0.01 µg/L | Below limit |
| PFHxA | <0.003 µg/L | 3 µg/L | Below limit |
| PFBA | <0.005 µg/L | 6 µg/L | Below limit |
| 11Cl-PF3OUdS | <0.005 µg/L | 0.005 µg/L | Below limit |
| 4:2 FTS | <0.003 µg/L | 0.003 µg/L | Below limit |
| 6:2 FTS | <0.005 µg/L | 0.005 µg/L | Below limit |
| 8:2 FTS | <0.005 µg/L | 0.005 µg/L | Below limit |
| 9Cl-PF3ONS | <0.002 µg/L | 0.002 µg/L | Below limit |
| ADONA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFBS | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFDA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFDoA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFHpA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFHpS | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFOA | <0.004 µg/L | 0.004 µg/L | Below limit |
| PFOS | <0.004 µg/L | 0.004 µg/L | Below limit |
| PFPeA | <0.003 µg/L | 0.003 µg/L | Below limit |
| PFTrDA | <0.007 µg/L | 0.007 µg/L | Below limit |
| PFUnA | <0.002 µg/L | 0.002 µg/L | Below limit |
Water utilities serving ZIP 01757
Service area boundaries are approximate and based on state filings or modeled estimates. Contact your utility to confirm exact service at a specific address.
- MILFORD WATER DEPARTMENTAction advised
Frequently Asked Questions about ZIP 01757 Tap Water
What contaminants are above EPA limits in ZIP 01757?
ZIP 01757 has 4 contaminants above EPA health guidelines in the latest available data, including PFOA at 1.8x the EPA guideline. The full table on this page lists every tested compound and its measured level.
Will boiling ZIP 01757 tap water remove PFOA?
No. Boiling does not remove PFAS, and the compounds can actually become more concentrated as water evaporates. To reduce PFAS at home, use a filter independently certified to NSF/ANSI P473 (activated-carbon pitcher or under-sink) or NSF/ANSI 58 (reverse osmosis).
Do basic pitcher filters remove PFOA?
Most basic pitcher filters are only certified to NSF/ANSI 42 or 53, which do not cover PFAS. Look for a filter independently certified to NSF/ANSI P473 (activated-carbon pitcher or under-sink) or NSF/ANSI 58 (reverse osmosis) on the spec sheet.
Who provides tap water in ZIP 01757?
Public records identify MILFORD WATER DEPARTMENT as a primary water system associated with ZIP 01757. Service boundaries can vary by address, so confirm exact service with the utility.
When was ZIP 01757 tap water last tested?
The most recent test date used in this report is June 2025. EnviroClarity last refreshed this page on 2026-05-05.
Where can I find the official water quality report for ZIP 01757?
Every U.S. public water system is required to publish an annual Consumer Confidence Report (CCR). Contact MILFORD WATER DEPARTMENT or visit their website for the latest official report covering ZIP 01757. The EPA also maintains a national CCR locator.
Check another ZIP code
Nearby ZIP reports
Data reflects publicly reported utility records from EPA datasets and local utility disclosures. This information is educational and not medical advice.