Is Industry, PA Tap Water Safe to Drink?
Industry tap water meets federal Safe Drinking Water Act standards but 2 of 2 ZIP codes show detections above EPA health guidelines, primarily for PFHxS. A certified filter is recommended for households that want an additional layer of protection.
Where Does Industry Get Its Water?
Water in Industry, PA is provided by 2 public water systems: BEAVER BORO MUNI AUTH and BRIGHTON TWP MUNI AUTH.
How Is Industry Tap Water Treated?
Treated water is disinfected using chloramines and free chlorine. Treatment includes air stripping and conventional treatment (coagulation, flocculation, and filtration).
What's in Industry Tap Water?
The following contaminants were detected most frequently in Industry public water systems. 2 of 2 ZIP codes showed detections above EPA health guidelines.
| Contaminant | Peak detected | EPA guideline | ZIPs detected | Status |
|---|---|---|---|---|
| PFHxS | 0.0282 µg/L | 0.004 µg/L | 2 ZIPs | Above guideline |
| PFBS | 0.0156 µg/L | 0.003 µg/L | 2 ZIPs | Above guideline |
| lithium | 10.3 µg/L | — | 1 ZIP | Within guideline |
| PFHxA | 0.0092 µg/L | — | 2 ZIPs | Within guideline |
| PFPeA | 0.0088 µg/L | — | 2 ZIPs | Within guideline |
Health Risk Profile for Industry
Based on EPA monitoring data, 2 of 2 ZIP codes in Industry have recorded detections above EPA health guidelines. Sensitive populations such as infants, pregnant individuals, and those with weakened immune systems may benefit from an additional layer of protection such as a certified point-of-use filter.
Best Broad-Spectrum Filters for This Water Profile
This city profile includes PFAS detections, chlorine disinfection, and other dissolved contaminants. Reverse osmosis (RO) systems certified under NSF/ANSI 58 provide broad reduction coverage; for PFAS specifically, confirm NSF/ANSI P473 or equivalent PFAS reduction certification.
8-stage tankless RO system certified to NSF/ANSI 58, reduces 1,000+ contaminants including PFAS, lead, arsenic, fluoride, and nitrates.
See recommendations matched to your exact address: choose your ZIP code below.
Frequently Asked Questions about Industry Tap Water
Is Industry tap water safe to drink?
Industry tap water meets Safe Drinking Water Act requirements but 2 of 2 ZIP codes show contaminant levels above EPA health-based guidelines. A certified point-of-use filter adds an extra layer of protection.
What contaminants are in Industry tap water?
The most commonly detected contaminants in Industry water systems include: PFHxS, PFBS, lithium. See the ZIP-level reports for exact measurements and EPA guideline comparisons.
Where does Industry get its drinking water?
Industry receives water from 2 public water systems, including BEAVER BORO MUNI AUTH.
Do I need a water filter in Industry?
If your ZIP code is among those with detections above EPA health guidelines, choose a filter certified for the specific contaminants shown in your ZIP report. Reverse osmosis is generally the broadest option for PFAS, lithium, and many other dissolved contaminants.
How often is Industry tap water tested?
Public water systems in Industry are required by the EPA to test for regulated contaminants on schedules ranging from daily (for microbials and disinfectants) to annual or triennial (for many chemical contaminants). Results are published in annual Consumer Confidence Reports (CCRs). The data on this page reflects the most recent available EPA monitoring results, with the latest sample date of 2024-11-18.
Tap water reports by ZIP in Industry
- 15009 - Brighton, Industry tap water report Higher concern
- 15052 - Shippingport, Industry tap water report Higher concern
Water utilities serving Industry, PA
Service area boundaries are approximate and based on state filings or modeled estimates. Contact your utility to confirm exact service at a specific address.
- BRIGHTON TWP MUNI AUTHAction advised
- INDUSTRY BORO MUNI AUTHNo recent federal sampling